Power Meter/Connector Adapters for 3M/Photodyne Equipment
Connector Adapter Caps mate the built-in threaded sensor port on 3M equipment to a variety of industry standard connectors. Fiber Plus International's Connector Adapters will work with the following 3M/Photodyne equipment: 11XE, 12XE, 17XTA, 17XTF, 18XTA, 1500XP, 2250XFA, 2285XQ and 2275XQ. If your part number is not listed, please call 3M at 1-800-426-8688 or Fiber Plus International directly at 1-800-232-5487 for assistance.

  Power Meter/Connector Adapters
Fiber Plus International offers manufacturers of power meters and test equipment a full line of connector adapters. FC, ST, SC, SMA, D4, Biconic, MTRJ, Universal, etc...

  Universal Power Meter/Connector Adapters
Available in 2.5mm and 1.25mm versions, the Universal Connector Adapters are available in 5/8", 3/4", 7/8", 9/16" and 1.25" diameters to fit most power meters. The adapters features an internal positive stop to prevent the ferrule from protruding out and possibly damaging the detector head. A custom internal sleeve aligns and holds the ferrules secure during testing.

  LiteLOCK™ Universal Power Meter/Connector Adapters
The LiteLOCK™ Universal Power Meter/Connector Adapters are available for 2.5mm or 1.25mm ferrules. The 2.5mm version will allow your power meter to accept FC, ST, SC, DIN, E2000 and most connectors with a 2.5mm ferrule. The 1.25mm version will accept MU, LC and most connectors with a 1.25mm ferrule. The adapters feature an adjustable LiteLOCK™ dial which allows the user to increase the tension around the ferrule to lock the connector into position during testing. Available as an OEM part only. Minimum order requirements apply.

Diameters/Threads currently available:
3/4"-32, 5/8"-24, 7/8"-28 and 1.25"-32

If you are a manufacturer and would like to offer this adapter with your equipment, please email us your port requirements.