K Series Bullet ^® Bare Fiber Adapter Kits
The K Series Bullet Bare Fiber Adapter Kits come with interchangeable FC, ST and SC Connector Modules and a QuickLINK Universal Mating Sleeve. The QuickLINK when placed on the ferrule of the connector module allows the Bullet Bare Fiber Adapter to connect to any patch/jumper cable with an FC, ST, SC, DIN, E2000 or 2.5mm connector. Kits are also available with the Precision Fiber Stop accessory which assists in aligning the fiber flush with the end of the ferrule - recommended if connecting directly to equipment.

  Custom Bullet ^® Bare Fiber Adapter Kits
Create your own custom Bullet Bare Fiber Adapter Kit with the connector modules and accessories you require.

  Connector Adapter Kit
The CPA (Power Meter Adapter) Kit will allow your test equipment to accept six different connector styles all from one adapter. The adapter is designed with a sizing ring (universal mount). The sizing ring will accept one of the six different connector faces included in the kit. The connector faces screw into the sizing ring allowing one adapter universal connections to FC, ST, SC, SMA, D4 or BICONIC connectors, singlemode or multimode.

  Inspection Scope Adapter Kit
The Inspection Scope Adapter Kit allows connections to six different connectors all from one adapter! Each kit includes one universal sizing ring (plug-in or threaded) with interchangeable FC, ST, SC, SMA, D4 and BICONIC connector faces. Available to fit virtually all Inspection Scopes (100x, 200x, 400x magnification).